|
|
The Boathouse Online
For Sale: |
“Connie”, 1957 Cruisers Inc. 19’ Model 502 Vacationer.
This is a one owner runabout, bought new by my dad in Racine, Wisconsin in 1957. He had the boat equipped with new twin 1957 Johnson Javelin 35 hp engines making the boat look exactly the way it looked in the 1957/58 catalog. Cruisers Inc. was formed by second generation Thompsons Grant and Roy Thompson with the blessings of the older Thompsons.
The boat has always been housed in dry shelter and has never sat in the water or in the sun other than for usage. She is totally original and is a "true classic”. “Connie” initially made many trips to Milwaukee from Racine and then in 1980 she was passed on to me where we used her out of Sturgeon Bay, Wisconsin.
In 1989 she was totally refinished and in 2016 she was put in dry storage and has been there since. The boat has won “Best Outboard” three times at the Door County. Maritime Museum August Festival. The engines have always received professional care and maintenance. In 2019 a compression test showed a 120-115 pressure reading per cylinder. They had received spark plugs, points, condenser and water impellers over the years. They have never been torn down for any repairs. The boat rides on a Shorelander trailer.
It is time for another family to enjoy her as much as we have.
BEST OFFER.
Lew Juadis, ceaj@charter.net
(920) 246-0146
(WI) (225) |
|
|
|
|
|
|
|
|
|
"Connie" Movie |
|
|
For Sale: |
1965 18ft. Thompson by Chris Craft Sea-V18 runabout.
Very rare.
Chris Craft was looking to buy a company that produced lapstrake boats in the 15-20 foot lengths to compliment their Sea Skiff line of boats. In 1962 they bought the Cortland, New York Thompson plant and rebadged the boat “Thompson by Chris Craft”. This boat was purchased from the original owner in Marysville, WA in 2002 and stayed in the area till 2021. In 2005 the hull was stripped, sanded and painted. New marine grade hull decking was also fabricated during this time. This work was done by a local professional boat builder. All parts, seats, windshield, emblems, flooring, etc. are all in good condition. The boat was never reassembled and put in the water, and has always been garaged since the work was finished. In 2021, the boat was sold and relocated to Southern California, where additional work was done including varnish.
The motor is a 1968 85hp Evinrude Starflite Electric Shift outboard motor. The engine was completely gone over in 2021. Everything that was either broken, or needed to be replaced, was done. This included a new engine harness (custom made because no longer available) all electrical components including NOS Voltage regulator, Rectifier, Amplifier, Choke solenoid, Coil and Yoke, Alternator stator and numerous other pieces. The lower unit has a new complete Water pump assembly, and all the bearings and seals in the lower unit are all new. The carburetor has been rebuilt and the fuel pump is a NOS. All new fuel lines. The engine has been cosmetically restored with new paint and restored Evinrude badges.
The wire harness from the motor to the dash is new, (custom made also), along with all new components in the dash, including ignition switch, choke switch, AMP meter, wiring and dash plate. All new battery cables and battery are also included. The fuel tank has been completely cleaned and restored, along with all new fuel lines. The Electric Shift control has been gone through, and the shift selector switch has been replaced with a new NOS one, along with a new throttle cable.
If interested, the motor is on a stand and can be run, shifted and confirm that everything functions as it is supposed to. There is a video available of it running. Also, there is a parts list available of all the parts and pieces that have been installed in this restoration. Over $4,100.00 in new parts.
Asking $4,500.00
Dave Anderson, ASAPDave@aol.com
(760) 953-3017
(CA) (224) |
|
|
|
|
|
|
|
Evinrude Movie |
|
|
For Sale: |
|
Free to a good home: |
1963 Thompson Sea Mate
No engine. The boat and trailer are in reasonably good condition. I have been running it every year for the last ten years through the summer of 2019.
She is water tight and solid. In the last five years it has gotten a new deck, new seats with custom upholstery, skeg replaced and new windshield framing. The boat needs one frame replaced which could be scarfed in. She needs varnish and paint.
I think it is a great boat for a small lake or pond. We moved to Bristol Rhode Island and I feel it is just to light given the prevailing winds here on Narragansett Bay. Obviously we would like it to go to a home where the folks are familiar with Thompsons and give her the attention she needs.
Lots of happy memories here and she turns heads on the launch ramp.
Steve, 203-770-4675, Email: stevekloeblen@gmail.com
(RI) (221) |
|
|
|
|
|
|
For Sale: |
1961 Fresh water Carver cabin cruiser
She is 24’ overall with an 8 foot beam. Large cabin with vee bunk, bathroom, dinette, and galley. Front decks replaced. Cabin top canvas covering has been replaced with fiberglass cloth, sealed over with resin followed by two coats of paint.
New aluminum fuel tank. Great running Chrysler Slant Six engine. The Eaton outdrive has been replaced with a Volvo out drive system. Has canvas top, nice alumimun double axle trailer. It’s a nice tight sound hull.
Combined weight of boat and trailer is approx. 5,500 lbs.
$7750.00
Dana Gersbach, 585-289-8674, Email: boathead45@yahoo.com
(NY) (220) |
|
|
|
|
|
|
|
|
For Sale: |
|
For Sale: |
|
For Sale: |
Very rare Thompson Victory Day Cruiser.
Built in 1965 this model was built in a very limited quantity.
She comes in at 24’ and is totally original including the Gator trailer as well as the top and aft cover with the Thompson emblem. She has always been kept indoors.
From 1965 to 2000 she was on Lake Minnetonka Mn. In 2000 I purchased it and restored it, and have used it every summer at my cabin on Leech Lake, MN since.
The Victory Day Cruiser was the largest Thompson built, at least in their era of wood production for that period. In 2002 I brought her to the Thompson rally in Marinette Wisconsin where Pete Thompson told me they built a couple more, one with twin engines for the Michigan Army Core of Engineers. She is powered by a 240 CI inline six cylinder GM engine with a Mercruiser I drive. Both engine and outdrive have been totally rebuilt. The 165 HP power plant pushes it right along. The pictures with this ad include a shot of John and Virginia Good, the original owners who special ordered it from the Thompson factory in Peshtigo, Wisconsin.
The boat includes too many options and extras to list including Mooring lines, life jackets, anchor etc.
Best offer.
Steve Arens, Steve@arensheatingandcooling.com
507-433-5652 (Austin MN) (215) |
|
|
|
|
|
|
|
|
For Sale: |
Thompson Burgees:
All burgees have correct reading on both sides with the official authorized Thompson logo. They are 10.25'" high and 16" long with two brass grommets.
Printed Burgee in blue or red with white printing,
$30.00 including shipping
Embroidered Burgee in blue or red with red or gray bird and white lettering, $55.00 including shipping
Thompson Apparel:
Embroidered Caps: red, khaki & blue · $25.00
T-shirts: more colors available than what is shown · $20.00
Polo shirts: more colors available than what is shown · $20.00
Sweatshirts: hooded & crew neck. more colors available than what Is shown · $30.00.
All prices include shipping
Mary: bmhermanson@gmail.com or 715-287-3374
(WI) (193) |
|
|
|
|
|
|
For Sale: |
Cruisers Inc. Burgees:
All burgees have correct reading on both sides with the official authorized Cruisers Inc. logo. They are 10.25” high and 16” long with two brass grommets.
Printed Burgee in dark blue with white printing,
$30.00 including shipping
Embroidered Burgee dark blue with white lettering,
$55.00 including shipping
Cruisers Inc. Apparel:
Caps: $25.00
Polo shirts: $20.00
T-shirts: $20.00
Sweatshirts: crew neck or hooded, 30.00
T- Shirts and Sweatshirts--
the logo can be in the center or on the left or right side.
All prices include shipping
Mary: bmhermanson@gmail.com or 715-287-3374
(WI) (195) |
|
|
|
|
|
|
|
Decals for your
Thompson Boat Restoration:
|
They are three color Gold, Black & Red silk-screened
“Waterslide” decal used on 1950’s and
earlier Cedar Strip built watercraft
Price is $30.00 (US) for a set of two (2) decals
Includes 1st Class mail to U.S. addresses only
Send check or money order made out to:
Phill Blank
5025W County Road C
Hurley, WI 54534
Phone: 715-561-3244
Email: pblank1244@gmail.com
(62) |
|
(5) |
|
|
|