63 Sea Lancer Dash Help
Posted: Mon Jan 30, 2017 7:19 am
Hello fellow Thompson collectors, restorers and dreamers,
I have a project I have been working on for a few years now that is finally reaching the point of reassembly. It is a boat that has been in the family for years and I hope to keep it that way for years to come. I will give out more info on this unique project later on, and if all works out, I will bring her over on the Badger to the 2017 rally.
My question today is about the original dash on the '63 Peshtigo built Sea Lancers. I need to know the height and thickness (aprox) of the vinyl covered dash board used. I also need to know the dimensions to where the steering column was mounted. Last, I need to know how wide the white vinyl stripe was down the center, and if any piping was used between the white and blue.
Thanks
Eric
I have a project I have been working on for a few years now that is finally reaching the point of reassembly. It is a boat that has been in the family for years and I hope to keep it that way for years to come. I will give out more info on this unique project later on, and if all works out, I will bring her over on the Badger to the 2017 rally.
My question today is about the original dash on the '63 Peshtigo built Sea Lancers. I need to know the height and thickness (aprox) of the vinyl covered dash board used. I also need to know the dimensions to where the steering column was mounted. Last, I need to know how wide the white vinyl stripe was down the center, and if any piping was used between the white and blue.
Thanks
Eric