thompsondockside.com

Posted: **Tue Jan 20, 2015 8:31 pm**

Hello all,
All (760 or so) of the machine screws fastening the planks between ribs on my 1968 20' Offshore are #6-32 X 1" Philips flat Head with a nut, either brass or bronze, not exactly sure which. I need about 800 of these things and having trouble finding silicon bronze that small. MUST be Philips. Looked at most of the suppliers noted on the site. Any help with this particular fastener? Thanks very much, Tim

Posted: **Wed Jan 21, 2015 4:36 am**

try www.classicboatconnection.com in Mankato, MN

Andreas

Posted: **Thu Jan 22, 2015 9:52 am**

McMaster-Carr has them in brass.
http://www.mcmaster.com/#92480a153/=vkv0bf

Verne

Posted: **Fri Jan 23, 2015 11:32 am**

Thank you Andreas and thank you Verne! I hadn't thought about McMaster Carr and also looked at Grainger's who has them and is on my way home. Thank you again, Tim

Posted: **Fri Mar 20, 2015 7:43 am**

Just saw your post about screws/refastening. How far from the original fastener did you put the new one?

thompsondockside.com

Plank Refasten - NEED SCREWS

Plank Refasten - NEED SCREWS

Re: Plank Refasten - NEED SCREWS

Re: Plank Refasten - NEED SCREWS

Re: Plank Refasten - NEED SCREWS

Re: Plank Refasten - NEED SCREWS