putting it back together
Moderators: a j r, TDockside, Miles, Moderators
-
- Posts: 102
- Joined: Mon Sep 05, 2011 3:17 pm
- Location: battle creek, michiganretired
putting it back together
at a point where i'd like to start putting my '57 sea coaster deluxe (model 477) back together. the damaged planks have been replaced and are back on. the frames are all new and installed - except for number 8 to the stem. i'm waiting for my new stem. the boat is braced every two to three feet and holding its shape just fine. the garboards will be installed last. the only original deck bracing I have is the rear deck brace which is in good shape. mid deck and forward deck braces all have to be replaced due to damage, but there is enough to make patterns. QUESTION: can I start at the transom and work my way forward putting in the new braces? one more item: the boat had no decking whatsoever. right now that isn't a concern, BUT i'm just curious as to how it attaches at the outer edges. thanks for any help...
Re: putting it back together
Good job!
Can't see any reason for not starting deck framing at stern and working forward. Or vice versa for that matter.
Deck was probably originally tacked to framing with little nails. I'd go for some 3M 5200 adhesive and nails or screws or nails and screws.
Andreas
Can't see any reason for not starting deck framing at stern and working forward. Or vice versa for that matter.
Deck was probably originally tacked to framing with little nails. I'd go for some 3M 5200 adhesive and nails or screws or nails and screws.
Andreas
-
- Posts: 102
- Joined: Mon Sep 05, 2011 3:17 pm
- Location: battle creek, michiganretired
Re: putting it back together
as always thanks andreas. by the way, I tried to get to the site you mentioned to see an actual '57 model 477, but it wouldn't let me. any chance of you or someone posting a picture of the boat. other than the diagram in a brochure, I've yet to see one. would really appreciate it. thanks.
Re: putting it back together
what site?
-
- Posts: 102
- Joined: Mon Sep 05, 2011 3:17 pm
- Location: battle creek, michiganretired
Re: putting it back together
in a previous answer to one of my questions (may 25th 2012), you mentioned you had 15 1957 sea coasters in your database 2 of which were the model 477. for some reason I can't get there with my computer/limited skills, etc. and was just wondering if you could post an actual picture. if you can't, that's okay. I may see another 477 at a show somewhere. evidently, it is not a very popular model. thanks...
Re: putting it back together
There is NO website with this information. It's data in a three ring binder on my desk. NO pictures. Just boat model, year, serial number and hull ID if known and owner's name if known.
Andreas
Andreas
Re: putting it back together
I have three Sea Coaster 477 models in my database, Two from 1957 and one from 1956. I do NOT have you or your boat in my database.
If you contact me privately, I can provide you more information.
Andreas
thompsonboat@msn.com
If you contact me privately, I can provide you more information.
Andreas
thompsonboat@msn.com