Page 1 of 1
Help, no ID. anywhere!!!
Posted: Sun Oct 07, 2012 4:44 am
by John Konieczny
Posted: Sun Oct 07, 2012 9:15 am
by Torchie
Ok....I'll go first.
Interesting little boat. Don't think that I have ever seen a factory built glass hull boat with exposed wooden ribs in the bootom. Unless it wasn't factory built or I am seeing the pics wrong.
Hull profile looks alot like a Lyman. I read some where that the MFG company used a Lyman hull for the mold of their first production fiberglass boats only to have Lyman reject their proposal, so MFG manufactured and sold them under their own branding. MFG was/is based in Ohio.
Windshield is very Lyman looking as well.
I would get on the FiberGlassics web site. You might have better luck.
Keep us posted.
Karl.
Posted: Sun Oct 07, 2012 11:23 am
by John Konieczny
Hey Karl,
The ribs are actually made out of some molded rubbery substance.
Also the same over the bottom portion of ribs.
I have registered with FiberGlassics & hope to get more info.
http://i1244.photobucket.com/albums/gg5 ... 9b0182.jpg
http://i1244.photobucket.com/albums/gg5 ... 09f074.jpg
http://i1244.photobucket.com/albums/gg5 ... 138965.jpg
Thank you very much for your time.
John
Posted: Mon Oct 08, 2012 1:11 am
by LancerBoy
Welcome aboard,
Groovy boat!
I see that thru fiberglassics.com someone has suggested she is a Simmons Sea Skiff. I cannot verify or refute this suggestion.
She is not a boat made by Thompson Bros. boat Mfg. Co. or Cruisers, Inc. or T & T Boats, Inc. or Thompson Boat Company of new York, Inc. or Grady White Boats. As far as I can tell form my knowledge of these brands.
"Morse" was an after market maker of throttle/shift controls for boats.
I've been thinking about the "LA" on the steering wheel. Can't come up with anything helpful. Steering wheel makers included: Wilcox-Crittenden; Kainer; Perko; and others. Many boat builders would put their own name brand sticker in the hub of the wheel.
Andreas
Posted: Wed Oct 10, 2012 4:50 pm
by John Konieczny
Hey,
I received a reply from Simmons.. "Your boat is not even close to a Simmons. Possibly a Thompson or Lyman". I am waiting for a response from MFG.
Well we know it is not a Thompson.
So, slowly eliminating builders.
Thank you for your help.
I will keep you posted.
Posted: Thu Oct 11, 2012 7:34 am
by Torchie
If you google Lyman Boat Works it will bring up the web site.
The Guy that runs it(Tom Korkorny ?) is the Andreas equivilant for Lymans. If Lyman built he will know.
The interesting points on your boat are the use of a wooden transom as well as windshield.
A few years back I was looking at a vintage MFG boat so I did some investigating into their history. That's where I read that they built a prototype hull using a Lyman for the mold.
The bow of your boat looks exactly like the bow of a 59 Lyman that I had. More verticle than most boats of that era. I am still betting that it was based on a Lyman hull .
Good luck and keep us posted. We all love a good mystery.
Karl.
Posted: Sat Oct 13, 2012 4:11 pm
by John Konieczny
Ladies & Gentlemen,
I believe I have found my boat.
MFG ( The Molded Fiber Glass Boat Company)
A 1957 Cambridge with the optional rear folding seat & Mahogany framed Windshield. It was advertised with two other boats.. The Erie & The Union
The Cambridge sold for $525..The Erie for $565..The Union for $495. Wow!
Now I do not know if what I have is a replica. Does anyone know how I can or If I will never know. This is new to me.
I am very excited to have found the information.
Check it out. Here is a link.
http://www.fiberglassics.com/wiki/image ... b57004.jpg
