thompsondockside.com

I am replacing the keelson after feedback from members. What should I ask for when ordering white oak for Keelson?
Quartersawn?
Kiln or air dried?
Obviously straight!
What is best method for beveling edges to angle of bottom?
Should I replace frames prior to keelson?
Any other advise is welcome.

For the keelson you want all heartwood white oak. NO sapwood. NO red oak. Does not matter if it's quartersawn or flat swan or rift cut. Doesn't matter if it's air or kiln dried. Use a hand plane to make your bevels. Or you can use a band saw if your good with that tool.

I'd replace keelson prior to installing new frames.

Seal all surfaces prior to assembly.

Andreas