Transom Jacks

THE LAKE · Post by **THE LAKE** » Tue Oct 19, 2010 8:41 am

Looking for folks who might have bought the product in the following link and opinions on same

http://www.allinflatables.com/shopping/ ... html#pt130

Brian

240sxguy · Post by **240sxguy** » Tue Oct 19, 2010 10:04 am

I hear those things work really well, I know quite a few guys on the mercury outpost forum use them.

THE LAKE · Post by **THE LAKE** » Tue Oct 19, 2010 12:21 pm

That's good to know. My 1st choice as noted on my post on the Golden Meteor thread is to try to obtain the optional OEM power tilt mechanism. Barring that, I will go with this. With my physical issues, there's no way I can manhandle this big 100hp outboard.

Brian

john · Post by **john** » Tue Oct 19, 2010 5:59 pm

Power lift for that engine, was very common, one unit fit engines from 1960 to 1968, 60,65,75,80, 85,90, and 100hp. I actually bought mine as NOS from my local dealer North Shore Marine in Houston 713 453 6314, 5 years ago.

Almost any old dealler should have one somewhere.

THE LAKE · Post by **THE LAKE** » Tue Nov 02, 2010 8:49 am

john
I called North Shore Marine yesterday. They quoted me a P/N for the OEM power tilt and a price ($355) They did not have one in stock, but are searching for one for me. Thank you for your help

Brian

john · Post by **john** » Tue Nov 02, 2010 5:05 pm

Brain

Marget at North Shore is amazing, they have nos old parts, almost everthing you would need. Bought a 1973 6hp nos crakshaft for my granddaughters, 6 hp Johnson she rebuilt.

There is a tilt unit for you, they were very comon. Should be a lot of used ones around.

john · Post by **john** » Tue Nov 02, 2010 5:24 pm

Brain

This may be it, check part number carefully, at one point sellers, says, 60,65,75,80,85, and 100 which are all 4 cyl, and then says he purchased it for 3 cyl 70 hp, most likey not the same unit.140473085962

It's new old stock on ebay 140473085962, has another 5 days or so.