Hello
(my first post)
I recently bought a '53 Sea Coaster (made in Cortland, NY) and I'd like some initial advice about the repairs needed to the bow stem.
I've gotten information about the local chapter of ACBS, so I'll soon have some people nearby to confer with.
Look at the pictures that I hope will be here:
http://s234.photobucket.com/albums/ee10 ... 010003.jpg
http://s234.photobucket.com/albums/ee10 ... 010002.jpg
http://s234.photobucket.com/albums/ee10 ... 010001.jpg
thanks;
HOPOIL
Syracuse, NY
1953 Seacoaster issue
Moderators: a j r, TDockside, Miles, Moderators
I see both screws and nails holding things together here, any special considerations when trying to remove the nails? Do you use some sort of nail puller with small jaws? or screwdriver blade and side-jaw pliers?
I'll take a picture from inside the bow soon and post it too. Looks like oak framing under those plywood topsides.
thanks
-Jeff (HOPOIL)
I'll take a picture from inside the bow soon and post it too. Looks like oak framing under those plywood topsides.
thanks
-Jeff (HOPOIL)
repairs started
so over the weekend I pulled out the brass nails holding down the plywood to get a better look at the problems at the top of the stem.
Here are three shots
http://s234.photobucket.com/albums/ee10 ... frames.jpg
http://s234.photobucket.com/albums/ee10 ... temcap.jpg
http://s234.photobucket.com/albums/ee10 ... em-rot.jpg
Hows this idea sound? (for lack of a more accurate word I'll use 'Breasthook') can I replace the block of wood behind the stem and cut away the bad portion of the top of the stem - with one new piece of wood? like a Breasthook?
One of the frames (left of center in the picture) is quite warped and will need to be replaced. all others appear solid. I'll try to pry back the top rail (or is it a gunnall?) and un-screw it.
any advise is welcome.
-Jeff
Here are three shots
http://s234.photobucket.com/albums/ee10 ... frames.jpg
http://s234.photobucket.com/albums/ee10 ... temcap.jpg
http://s234.photobucket.com/albums/ee10 ... em-rot.jpg
Hows this idea sound? (for lack of a more accurate word I'll use 'Breasthook') can I replace the block of wood behind the stem and cut away the bad portion of the top of the stem - with one new piece of wood? like a Breasthook?
One of the frames (left of center in the picture) is quite warped and will need to be replaced. all others appear solid. I'll try to pry back the top rail (or is it a gunnall?) and un-screw it.
any advise is welcome.
-Jeff