63 Sea Lancer Dash Help

[ewrice]

Hello fellow Thompson collectors, restorers and dreamers,
I have a project I have been working on for a few years now that is finally reaching the point of reassembly. It is a boat that has been in the family for years and I hope to keep it that way for years to come. I will give out more info on this unique project later on, and if all works out, I will bring her over on the Badger to the 2017 rally.

My question today is about the original dash on the '63 Peshtigo built Sea Lancers. I need to know the height and thickness (aprox) of the vinyl covered dash board used. I also need to know the dimensions to where the steering column was mounted. Last, I need to know how wide the white vinyl stripe was down the center, and if any piping was used between the white and blue.

Thanks
Eric

[LancerBoy]

Well let's hope that someone who has one of these pipes up and answers your questions.

Andreas

[LancerBoy]

Anyone out there with a 1963 Sea Lancer (or other '63 model?) that can provide some dimensions???

Andreas

[ewrice]

I have all the dimensions on this now. Was able to measure a boat locally, and do some creative measuring and calculating on old family photos.