Control Cables Too Long

Suggestions, concerns, and what is the correct power plant for your Thompson.

Moderators: a j r, TDockside, Miles, Moderators

Post Reply
vernonfarmer
Posts: 106
Joined: Wed Jul 19, 2006 6:59 pm
Location: Vernon, WI

Control Cables Too Long

Post by vernonfarmer »

Johnson control cables are way too long for the boat. How do you deal with this? Is there a correct way to shorten them? Engine-side or control-side?
I'm talking about 5 feet worth too long!

Thanks,
John
Top
JoeCB
Posts: 241
Joined: Fri Dec 30, 2005 5:17 pm
Location: Farmington Hills , MI

Post by JoeCB »

No good way to shorten them... your best bet is to try and trade for the correct length. in any case they are not too costly. BUT ... please consider that they need to be installed with generous curves, no tight bends, and enough slack to accomodate tilting and turning the motor without kinking.
Joe B
Top
Post Reply

Return to “Engines”